What are the purchasing principles or standards for the automatic colony counter?
First, the selection of imaging hardware Imaging hardware is used to obtain clear and effective colony images in order to analyze the count. Today's imaging hardware is photo-imaged, scanned and imaged. The advantage of taking pictures by the camera is that the imaging speed is fast, and it can ensure that the colony image is obtained within 0.5 seconds. The advantages of taking photos by SLR cameras and card machines are: multi-point or single-point autofocus, and the pixel resolution is generally higher, but the imaging takes 3 to 4 seconds. However, the Achilles heel of all photo imaging is: the intensity of light in the imaging environment, whether it is dark-field or backlit, it is impossible to keep the center and edge of the image exactly the same. This causes inconsistencies in the brightness of the plates, which seriously interferes with the automatic identification of colony targets. Therefore, if you want to purchase photo imaging, the analysis software must have automatic background correction function to automatically improve the imaging effect. Scanning imaging is different from creating a uniform surface light source in a light box. The line light source is moved into a surface light source by movement, so the light intensity is very uniform, and its uniformity is usually an order of magnitude higher than the surface light source of the photo light box, from the fundamental of the imaging hardware. The problem of uneven brightness of the colony target is solved, so the counting analysis is very stable and the operation is simpler. Currently, the speed of scanning six 90mm diameter plates at 300dpi resolution (3482×2396 pixel imaging), dark field imaging for about 12 seconds, backlight imaging for about 20 seconds, in terms of imaging speed, average to each plate and SLR Cameras and card machines take pictures at the same speed. Since the uniformity of light in scanning imaging is much higher than that of photographing, high-quality imaging is achieved in order to achieve "fool" analysis. Another advantage of scanning imaging is that the imaging resolution is adjustable, and the single plate imaging can reach up to 4800 dpi (ie: 25.4/4800=0.00529 mm/pixel), which is far from any photo imaging. It can be expected that scanning imaging will soon become the mainstream choice.
Second, the analysis software selection analysis software is another core component of the automatic colony counter. Because of the diversity of colony organisms, the performance or visualization on the medium may not be roughly consistent. For such changes, the selection of analysis software should consider: the automatic discharge capacity for various types of imaging interference. For example: whether it can automatically correct the background, and so on. In addition, for the grouped and chain-distributed colonies that are severely stuck together, the level of automatic separation is also a measure of evaluation software. In particular: the intelligent one-click intelligent classification and counting ability of the same type of colonies, as well as the automatic recognition learning ability for colony counting classification, is a key consideration for evaluating analysis software. Now better analysis software, it also integrates the automatic measurement function of the inhibition zone of six 90mm diameter plates, as well as antibiotic titer analysis and drug sensitivity analysis function, which can avoid the user's repeated purchase of imaging hardware. General analysis software should have the ability to save and view analysis results and markup images.
Third, accurate, stable fool-type operation Automatic colony counter is to reduce the work intensity of the staff, in today's high-tech, if you still need to estimate the number of colonies, it should be relatively backward. The best is: the analysis software that can accurately and stably operate the "invariant strain", which can automatically adapt to the uncertainty of colony morphology and sample state, so as to avoid constantly adjusting the colony segmentation parameters. Dialogue interactions to erase those contaminated parts.
Orlistat is a long-acting and potent specific gastrointestinal lipase inhibitor. It is white or off-white powder at room temperature. It is insoluble in water, soluble in chloroform, and easily soluble in ethanol. It passes through the stomach and small intestine cavity. Intragastric lipase and pancreatic lipase active codon form a covalent bond to inactivate the enzyme. Fat in food cannot be broken down into free fatty acids and monoacylglycerols, so the fat cannot be absorbed and utilized, thereby reducing the body's caloric intake and controlling body weight. This medicine does not need to be absorbed through the body to exert its effects. At the usual dose, fat absorption can be suppressed by 30%. It is rarely absorbed after oral administration and can be metabolized and inactivated in the intestine. The metabolic site is on the wall of the gastrointestinal tract, and the elimination half-life is about 14 to 19 hours. About 97% of this product is excreted with feces, of which 83% is excreted in the original form.
Orlistat can be used clinically for obesity and hyperlipidemia. Under normal circumstances, 120mg can be taken orally once a day, three times a day, and taken within one hour after a meal. After taking the medicine for 2 weeks, the weight may start to decrease. It can be taken continuously for 6 to 12 months. If the dose is increased to more than 400 mg per day, its effect will no longer be enhanced.
Orlistat Dosage,Orlistat Weight Loss,Orlistat Function,Orlistat For Weight Loss
Jinan Prosperity International Trade Co. Ltd , https://www.jnprosperity.com