Salt spray box meets standards, specifications and related parameters
First, [forest frequency] salt spray box meets the standard:
GB/T2423.17-2008 Basic environmental test procedures for electric and electronic products - Test method for KA salt spray
GB/T 2423.18-2000 "Basic procedures for electric and electronic products test" Kb: salt spray, alternating (sodium chloride solution)
GB-T10125-1997 Artificial atmosphere salt spray corrosion test
GB/T10587-2006 salt spray test chamber technical conditions
GB10593.2-1990 Methods for measuring environmental parameters of electric and electronic products
GB-T1765-1979 Method for preparing paint film for moisture and heat resistance, salt spray resistance and weather resistance (manual acceleration)
GB T1771-2007 Determination of resistance to neutral salt spray of paints and varnishes
GB/T12967.3-2008 Copper accelerated acetate spray test (CASS test)
GB/T 5170.8-2008 Electrical and electronic products environmental testing equipment inspection methods Salt spray test equipment and equivalent IEC, MIL, DIN, ASTM and other related standards or industry standards.
Second, [forest frequency] salt spray box specifications model (unit: mm):
Model LP/YWX-150 Inner Dimensions D×W×H 450×600×400 Dimensions 700×1200×1100 Power: 1.3KW
Model LP/YWX-250 Inner Dimensions D×W×H 600×900×500 Dimensions 950×1500×1200 Power: 1.5KW
Model LP/YWX-750 Inner Dimensions D×W×H 750×1100×500 Dimensions 1100×1700×1250 Power: 4.0KW
Model LP/YWX-010 Inner dimension D×W×H 850×1300×600 Dimensions 1150×2100×1550 Power: 5.0KW
Model LP/YWX-020 Inner Dimensions D×W×H 900×2000×600 Dimensions 1250×2800×1600 Power: 6.5KW
Third, product technical indicators:
1, temperature range: RT + 5 ° C ~ 55 ° C
2. Humidity range: 85~98% R?H
3. Temperature fluctuation: ±0.5°C
4, temperature uniformity: ± 2 ° C
5, salt spray settlement: 1 ~ 2ml / 80cm2.h
6, air saturator: RT + 10 ° C ~ 70 ° C
7. Compressed air pressure (kg/cm2): 2.00±0.01
8, spray method: continuous / cycle optional
9, test time: 1 ~ 9999 H, M, S (adjustable)
10, cycle time: 1 ~ 99 H, M, S (adjustable)
11. Sample holder: The sample holder can meet the tilt test of 15 ° C ~ 30 ° C
Fourth, the control system:
With the intelligent YWX100 integrated control temperature controller, it has a comprehensive protection system, which makes you safer and more secure during use:
1. No fuse protection switch;
2. Over temperature protection of the box and saturator;
3. Low water level protection of the box and saturator;
4. End of test instructions;
5, rapid fog indication;
6. Compressed gas two-stage voltage regulation and voltage protection;
7, overload, leakage has automatic shutdown and other protection.
Fifth, the box structure → ↠spray system:
1. The salt spray test box is made of imported PVC reinforced hard plastic board. The surface is smooth and flat, and it is resistant to aging and corrosion. It is easy to clean and has no leakage. Abandoning the FRP material should produce surface fading and fibrillation. The forest frequency can also be based on Customers request custom PP board material.
2, super large salt water tank design, to stop the test due to lack of salt water;
3, heating is the inner tank type heating and humidifying method, the heating is fast, the temperature and humidity are evenly distributed;
4. The spray gas is subjected to two-stage voltage regulation and pressure regulation, and oil pollution filtration and gas humidification preheating are performed at the same time;
5. The atomized brine storage is built-in concealed and has a large storage capacity, and the brine is equipped with a preheating function;
6. The quartz brine filter element is equipped before the salt water is atomized to avoid the nozzle impurity blockage test.
7. All pipes in the test box are made of thickened fluorosilicone rubber tube, which can remain unaged and cracked for 15 years;
8. The salt water tank has high and low water level indications;
9, customer-supplied air compressor, purchase requirements: Exhaust pressure: ≥ 8 kg Volume flow: ≥ 0.12m3 / min.
This classification summarizes the Organic Chlorella Powder produced by our own factory in northwestern of China .
We have advanced equipment and strict quality control system to ensure the quality and production.
The products under the classification are:
1. Organic Chlorella Powder .
Various parameter specifications of our product:
Naturland Certified ; CERES certified .
EU & NOP standard ; Kosher & Halal Available .
Low heavy metals & Micro Contents , Low & Stable PAH4 Level ,
PAH4 value is less than 10 ppb .Low microorganismsNon-Irradiation ,
Non GMO , Gluten Free , Allergen Free , Pesticides Free .
Own Factory : Manufacture in northwest of China . Legitimacy , Regularity , Cultural .
Own Lab : Quality control and Product development . Strictly , Creativity , Responsibility .
About Company
Yanchi County Yijian Biotechnol Co.,Ltd
was founded in Dec 2012 ,
by Mr. Dezhi Zhang ,
the legal representative of the company .
Company registered capital is 10 million RMB .
The main business sectors are culture , processing , internal sales , import and export trade of Organic Spirulina and organic chlorella products .
Yijian is known globally as one of the major suppliers of microalgae products across the world .
Annual production rate is 600 Mt .
Average annual sales income is around 5 million dollar .
Organic Chlorella Powder
Organic Chlorella Powder,Pure Organic Chlorella Powder,Organic Feed Grade Chlorella Powder,Pure Natural Chlorella Powder
YANCHI YI JIAN BIOLOGICAL PROJECT CO.,LTD , http://www.spirulina-yj.com