Maintenance and maintenance of the breathing valve

The breathing valve is used to install the main safety equipment on fixed top storage tanks such as crude oil, gasoline, kerosene, light diesel oil, aromatics, etc. It is used for evaporation loss and protection of the tank from being damaged when subjected to overpressure or vacuum. Breathing valves are often used with flame arresters.
In order to use the safety of the breathing valve , the corrugated fire-retardant layer should be removed regularly and cleaned within 3-6 months to ensure that each hole in the fire-retardant layer is unblocked to prevent blockage and ensure safe and normal use.
Regularly check whether the positive and negative valve discs of the breathing valve are flexible, and whether the guide rod and the valve disc contact the sealing surface are damaged. If there is damage, it should be replaced immediately.
When inspecting and maintaining the re-installation of the breathing valve , it should be ensured that the joint surfaces in the valve are closely matched and the valve disc is lifted and lowered flexibly.
When the breathing valve is activated, the anti-vibration between the valve discs should be cleared before installation, otherwise the breathing valve will fail .
The last valve knowledge: balance valve for occasions
Next valve knowledge: regulation valve failure analysis
· Butterfly valve knowledge: butterfly valve test and installation and troubleshooting methods 2009-6-5
· Solenoid valve characteristics and applicability 2009-5-23
· Steam trap overview and working principle 2009-5-22
· Butterfly Valve Overview 2009-5-21
· Steam trap overview 2009-5-21

Related products:
QZF-89 all-weather fire retardant valve
QZF-89 all-weather fire retardant valve
HDF-1 pneumatic subsea valve
HDF-1 pneumatic subsea valve
HDF-3 pressure balanced pneumatic subsea valve
HDF-3 pressure balanced pneumatic subsea valve
Hydrogen flame arrester
Hydrogen flame arrester
ZGB-2 (all weather) type drawer type corrugated flame arrester
ZGB-2 (all weather) type drawer type corrugated flame arrester
HGS07 mesh type flame arrester
HGS07 mesh type flame arrester
Anti-overflow fire-resisting valve
Anti-overflow fire-resisting valve
Built-in breathing valve
Built-in breathing valve
Fire retardant cap
Fire retardant cap
GZW-1 pipe flame arrester
GZW-1 pipe flame arrester
RGYA hydraulic safety valve
RGYA hydraulic safety valve
GLY oil hole
GLY oil hole
HX with take-over breathing valve
HX with take-over breathing valve
RGFQ-01 breathing valve
RGFQ-01 breathing valve
RZFQ-1 explosion-proof fire retardant valve
RZFQ-1 explosion-proof fire retardant valve
RZGB-1 corrugated oil storage tank flame arrester
RZGB-1 corrugated oil storage tank flame arrester

Knee Warmer is using batteries as power supply, to reduce pains of the knees. It provides stable heat penetrating so as to relax fatigue caused to the knees.

It is always with velcro for fastening better, which also enhance the heat therapy effect, as it touches better to human knees.

Below picture for reference, it can be made in different shapes and designs.

knee warmer

Knee Warmer

Knee Warmers for Arthritis, Specialized Knee Warmers, Electric Knee Warmer, Thermal Knee Warmer

Ningbo JustLive Electrical Appliance Co., Ltd , https://www.makeheat.net