First, the process of harvesting - Classification - Cleaning - Fixing - Cooling barrels Second, the process requirements 1. Harvest classification: for salting with the mushroom body must be harvested in a timely manner to prevent the opening of the umbrella. Harvesting should be carried out gently to ensure the integrity of the mushroom body, no damage, mushroom handle cutting neatly, picking away mushrooms, insects and mushrooms, spotted mushrooms, malformed mushrooms. The mushroom body grading should be classified according to the requirements of the buyer or the general grade standards of various edible fungi according to the diameter of the cap, stem length, and mushroom shape. Even if the demand side is the command of the mushroom, it is also necessary to separate the big and small mushrooms when they are in the blue to control the ripeness so as to guarantee the quality of the killing. The time required to receive the grading from harvesting is short and cannot be squeezed to reduce the damage of the mushroom body. 2. Cleaning: The role of cleaning is to wash away the impurities on the surface of the mushroom body, bleach the mushroom table, and prevent oxidation and browning of the mushroom. The mushrooms are usually soaked in 2% saline. Then immersed in a solution of 0.03--0.05% sodium metabisulfite, bleached and protected for 10 minutes, rinsed with fresh water 3-4 times, washed off the mushroom table sodium metabisulfite. 3. Fixing: Fixing the role of the main three points: 1 drive away the air in the mushroom body tissue, destroy the enzyme protein, prevent browning; 2 kill the mushroom cell, destroy the cell membrane structure, enhance cell permeability, is conducive to saline infiltration tissue; 3 soften Organize, increase plasticity, easy to process. Casserole with aluminum pan, conditional available sandwich stainless steel pre-cooked pot. Boil the water in the pot and pour it into the mushroom body (40% of the amount of water is appropriate for the amount of mushrooms), and gently bob up and down while cooking to make the mushroom body uniform. Remove the floating foam and cook until the mushroom body is cooked and not rotten. Fixing time depends on the type and size of the mushroom. Coprinus comatus, straw mushroom, oyster mushroom, and tea mushroom are 8-10 minutes, and Agaricus blazei is about 10-12 minutes. There are several methods to identify the standards for ripening and ripening: 1 When the mushroom is ripe, it sinks into the bottom of the pot, while the raw one floats; 2 The mushroom is cut, cooked yellow, and raw white; 3 The bite test, raw The sticky teeth, cooked crisp and non-stick teeth; 4 fish out of the body into cold water, if the sink is cooked, if the float is raw. 4. Cooling barrel: the role of cooling is to terminate the heat treatment, if the cooling is not transparent, the thermal effect continues to make the mushroom's color, flavor, structure destroyed, easy to moldy rotten, black. The method of cooling is to put the frozen mushroom body into flowing cold water to cool it or cool it in turn with 3-4 cold water tanks in succession until it is completely cold. Cooling mushroom barrel or cylinder into the preservation, a layer of salt layer mushroom, cover a layer of salt, add the right amount of water, water to dip into the mushroom body an inch and a half is appropriate. Salting the final amount of 100 kg of mushrooms + 30 pounds of salt (in divided order).
Injection Grade Hyaluronic Acid is mainly used for intra-articular and intra-ocular
preparations. Injection Grade HA is widely used in plastic surgery, joint
dysfunctions of human or animals (horse, dogs etc.), preventing postsurgical
tissue adhesion and drug carrier.
Feature
1. Reliable and safty: Our Injection Grade Hyaluronic Acid is GMP, CEP, DMF certificated and the
factory passed an on-site inspection by the US FDA. Our Injection Grade Sodium hyaluronate is all fermented products,
non-animal sources, non-GMO and non-BSE/TSE risk.
2. High-purity and lower impurities:
higher glucuronic acid content, lower protein, heavy metals and nucleic acid
content, extremely low endotoxin content, compared with other injection grade
hyaluronic acid in the market.
3. High stability: stability test
shows our injection grade hyaluronic acid is stable during the
transportation and storage.
Function
Healthy Skin:
Hyaluronan is also a
component of skin tissues, and helps in the repair of skin cell. It helps in
tissue lubrication and faster healing of wounds. Another major benefit of this
acid is its anti-wrinkle effects, as it helps the skin build up levels of
collagen, increasing suppleness and moisture.
Treating Osteoarthritis:
Hyaluronic acid covers the spaces between the joints of the knees and protect the bones
from damage due to friction. Injections
of hyaluronic acid are prescribed to increase the level of this acid in the
joints, and relieve pain. Even the oral intake of this acid through foods or
supplements is helpful.
Healthy Eyes:
Hyaluronic
acid is also beneficial to the eyes, as it can be used as artificial tears for
dry eyes. The acid is used in many anti-aging creams for the face, and can also
be injected into the wrinkles near the eyes, commonly known as 'crow's feet'.
Aesthetic Injections (Facial & Body)
Hyaluronic acid based gel injections(HA dermal filler) are a new option for the on-spot
treatment of facial wrinkles. These shots must be administered by a
dermatologist and last up to 4 to 6 weeks.
Specification
|
Test Items
|
Standard
|
|
Appearance
|
White powder
|
|
Hyaluronic acid
|
≥98%
|
|
Molecular weight
|
≥2.0X 106 Da
|
|
PH
|
6.0-7.5
|
|
Loss on drying
|
≤8%
|
|
Protein
|
≤0.05%
|
|
Nitrogen
|
2.0-3.0%
|
|
Heavy metal
|
≤10ppm
|
|
Bacterial counts
|
≤10cfu/g
|
|
Mold and Yeast
|
≤10cfu/g
|
|
Endotoxin
|
≤0.5eu/mg
|
|
Sterile Test
|
Complies
|
|
Shelf Life
|
Two Years
|
|
Conclusion
|
The results meet the standard
|
Injection Grade Hyaluronic Acid Powder
Medical Grade Hyaluronic Acid,Hyaluronic Acid Injection,Injection Grade Hyaluronic Acid Powder,Hyaluronic Acid Liquid
Qufu Hi-Tech Trading Co., Ltd. , http://www.chinahyaluronic-acid.com