Plastic pulverizer operation precautions
2021-07-05 15:05:48
Plastic pulverizer operation precautions:
1. The plastic pulverizer and power unit should be installed firmly. If the plastic crusher is required to be fixed for a long time, it should be fixed on the cement foundation; if the plastic crusher is required to flow, the unit should be installed on the base made of angle iron and ensure the power machine (diesel or electric motor) and plastic. The pulley groove of the crusher is in the same plane of rotation.
2. After the plastic pulverizer is installed, check the fastening condition of each fastener. If it is loose, it should be tightened. Also check that the belt tightness is appropriate.
3. Before starting the plastic pulverizer , first turn the rotor by hand to check whether the teeth, hammer and rotor are flexible and reliable. Whether there is collision in the crushing chamber, whether the direction of rotation of the rotor is consistent with the direction indicated by the arrow, the power machine and Whether the plastic crusher is well lubricated.
4. Do not change the pulleys casually, in case the rotation speed is too high, causing the explosion chamber to explode, or the rotation speed is too low, which affects the working efficiency of the crusher.
5. After the plastic pulverizer is started, it should be kept idling for 2~3min. After no abnormal phenomenon, it can be fed again.
6. Attention should be paid to the operation of the plastic shredder at work. First, the feeding should be uniform to prevent the crushing of the crushing chamber; secondly, do not overload the work for a long time. If any vibration, noise, bearing and body temperature are too high, and the material is sprayed outward, stop the machine immediately and check it out.
1. The plastic pulverizer and power unit should be installed firmly. If the plastic crusher is required to be fixed for a long time, it should be fixed on the cement foundation; if the plastic crusher is required to flow, the unit should be installed on the base made of angle iron and ensure the power machine (diesel or electric motor) and plastic. The pulley groove of the crusher is in the same plane of rotation.
2. After the plastic pulverizer is installed, check the fastening condition of each fastener. If it is loose, it should be tightened. Also check that the belt tightness is appropriate.
3. Before starting the plastic pulverizer , first turn the rotor by hand to check whether the teeth, hammer and rotor are flexible and reliable. Whether there is collision in the crushing chamber, whether the direction of rotation of the rotor is consistent with the direction indicated by the arrow, the power machine and Whether the plastic crusher is well lubricated.
4. Do not change the pulleys casually, in case the rotation speed is too high, causing the explosion chamber to explode, or the rotation speed is too low, which affects the working efficiency of the crusher.
5. After the plastic pulverizer is started, it should be kept idling for 2~3min. After no abnormal phenomenon, it can be fed again.
6. Attention should be paid to the operation of the plastic shredder at work. First, the feeding should be uniform to prevent the crushing of the crushing chamber; secondly, do not overload the work for a long time. If any vibration, noise, bearing and body temperature are too high, and the material is sprayed outward, stop the machine immediately and check it out.
Shaanxi YXchuang Biotechnology Co., Ltd , https://www.peptidenootropic.com