The edible fungus winter management pays attention to three points
2018-12-13 12:09:38
Raise the temperature of the mushroom bed and create suitable conditions for the long mushroom. Cold in winter, pay attention to insulation. The film on the mushroom bed must be covered when the mushroom is peeled off. Pleurotus shed should dilute the covering on the shed. The mushroom shed should be covered with a thin layer of film on the exterior of the shed. The night shed should be covered with shading nets or grasshoppers and other antifreeze. After the above measures are taken, the temperature in the shed can be raised by 5°C to 10°C, which ensures that edible fungi can still produce mushrooms normally in the cold winter. Water and moisture control, warmth and cold-proof mushrooms, oysters, and the growth of autumn bacteria, mushroom rods more water loss, only the original weight of 50% to 60%, at this time should be timely replenishment. Before replenishment, open the shed door for ventilation for 3 to 4 days. When replenishing water, water injection needle can be used to pierce the bacillus. With the pressure of the water pump, the bacterium can absorb enough water in a short period of time to use well water. The principle of water spray is: spray water, mushrooms and more time and more spray, when the mushroom less spray, bud more than spray, harvest time spray. Mushrooms basically do not need replenishment in winter. Pay attention to ventilation and ventilation to avoid the occurrence of cold wind attacks mushroom buds, respiratory vigorous, if the air does not circulate, excessive carbon dioxide deposition, will inhibit the formation and growth of fruiting bodies. Ventilation should be carried out before and after noon at high temperatures. The time is 10 to 20 minutes. When entering or exiting the shed, they should enter and exit from the south side of the shed to prevent cold and cold winds from attacking.
Medical Accessories,Home Medical Supplies,Handicap Equipment,Hospital Supplies
Pharmaceutical Intermediate Co., Ltd. , http://www.anbo-medical.com