How to maintain maintenance corn no-tillage planter

First, an important note - should always pay attention to the speed of the machine, the sound is normal. After the daily operation is completed, remove the clay from the equipment, hang the grass, clean up the remaining seed fertilizer, rinse with water and dry it, and then apply anti-rust oil to the opener. Check if the fixing nut is loose or worn. If it is loose, it should be tightened immediately. When the wearing parts are worn, they should be replaced in time. Fill the oil in time, check whether the fastening screws and key pins are loose, and remove them if abnormalities are found. Second, it is necessary to regularly check the degree of tension of each transmission component and the clearance of each matching part is appropriate, and should be adjusted in time. Third, we must regularly clean the dust on the hood of the machine, debris, and dirt on the surface of the trencher to prevent the machine from rusting. 4. After the end of each operation, the machine can be stored in the warehouse under conditions, and when it is stored outdoors, it should be covered with plastic sheeting to prevent it from getting wet or rain. V. Sealing period maintenance: 1. Clean the dust, dirt, grains and other debris inside and outside the machine. 2. Put paint on places such as racks and covers that are worn away. 3. Place the machine in a dry warehouse. When conditions permit, place the machine overhead and cover with a tarpaulin to prevent the machine from being exposed to moisture, sunlight and rain. 4. Before the next year of use, the planter should be thoroughly cleaned and overhauled. All bearing seat covers should be opened, oil and debris should be removed, and the lubricant should be re-applied, and parts that are deformed and worn must be replaced. After the parts are replaced or repaired, the connecting bolts must be fastened as required.

Facial Treatments

Fei County Mingtao Electronic Co.,Ltd , https://www.yourbeautyassistant.com