Brief description of filter installation and maintenance
2021-09-23 23:18:43
Filter installation and maintenance All types of filters are not allowed to open the packaging bag or packaging film before installation; and the filter is stored in the direction marked on the package; during handling, it should be handled gently and gently to avoid violent Vibration and collision.
In the process of transportation, installation and use, it should be carried out according to requirements to ensure the use effect. After using the filter for a period of time, the dust is trapped on the surface of the filter material, so that the efficiency and resistance of the filter are lowered, which affects the cleanliness of the air supply. In this case, the filter needs to be replaced in time.
For high-efficiency filters that need to be used in high humidity and high temperature environments, filter papers with high temperature and high humidity resistance, partition plates and frame materials must be selected to meet the production requirements. The biological clean room and the medical clean room must use the filter of the metal frame, and the surface should be not easy to rust. It is not allowed to use the filter of the wooden frame plate to prevent bacteria and affect the qualified rate of the product.
For the above filter , if there is a differential pressure gauge or a differential pressure sensor before and after the filter, the coarse filter must be replaced when the pressure difference is greater than 250Pa; for the medium efficiency filter, the pressure difference is greater than 330Pa. Must be replaced; for sub-high efficiency filters, when the pressure difference is greater than 400Pa, it must be replaced, and the original filter can not be reused; for high-efficiency filters, when the resistance value of the filter is greater than 450Pa; or when The airflow speed drops to the low limit of Zui. Even if the coarse and medium efficiency filter is replaced, the airflow speed cannot be increased. Or when the surface of the high-efficiency filter has unrepairable leakage, a new high-efficiency filter must be replaced. If there is no such condition, it can be replaced once every 1-2 years depending on the environmental conditions.
In order to give full play to the role of the filter, the upstream wind speed of the filter during the selection and use, the coarse and medium efficiency filter should not exceed 2.5m/s, and the sub-high efficiency filter and high efficiency filter should not exceed 1.5m/ s, this will not only help to ensure the efficiency of the filter, but also extend the life of the filter and save costs. When the equipment is running, generally do not replace the filter; if the filter has not been replaced due to the replacement period, only allow Replace the coarse and medium efficiency filter without stopping the fan; the sub-high efficiency filter and the high efficiency filter must be stopped before the air supply can be replaced; the gasket between the filter and the connecting frame must be tight and leak-free. Guarantee the filtering effect.
In the process of transportation, installation and use, it should be carried out according to requirements to ensure the use effect. After using the filter for a period of time, the dust is trapped on the surface of the filter material, so that the efficiency and resistance of the filter are lowered, which affects the cleanliness of the air supply. In this case, the filter needs to be replaced in time.
For high-efficiency filters that need to be used in high humidity and high temperature environments, filter papers with high temperature and high humidity resistance, partition plates and frame materials must be selected to meet the production requirements. The biological clean room and the medical clean room must use the filter of the metal frame, and the surface should be not easy to rust. It is not allowed to use the filter of the wooden frame plate to prevent bacteria and affect the qualified rate of the product.
For the above filter , if there is a differential pressure gauge or a differential pressure sensor before and after the filter, the coarse filter must be replaced when the pressure difference is greater than 250Pa; for the medium efficiency filter, the pressure difference is greater than 330Pa. Must be replaced; for sub-high efficiency filters, when the pressure difference is greater than 400Pa, it must be replaced, and the original filter can not be reused; for high-efficiency filters, when the resistance value of the filter is greater than 450Pa; or when The airflow speed drops to the low limit of Zui. Even if the coarse and medium efficiency filter is replaced, the airflow speed cannot be increased. Or when the surface of the high-efficiency filter has unrepairable leakage, a new high-efficiency filter must be replaced. If there is no such condition, it can be replaced once every 1-2 years depending on the environmental conditions.
In order to give full play to the role of the filter, the upstream wind speed of the filter during the selection and use, the coarse and medium efficiency filter should not exceed 2.5m/s, and the sub-high efficiency filter and high efficiency filter should not exceed 1.5m/ s, this will not only help to ensure the efficiency of the filter, but also extend the life of the filter and save costs. When the equipment is running, generally do not replace the filter; if the filter has not been replaced due to the replacement period, only allow Replace the coarse and medium efficiency filter without stopping the fan; the sub-high efficiency filter and the high efficiency filter must be stopped before the air supply can be replaced; the gasket between the filter and the connecting frame must be tight and leak-free. Guarantee the filtering effect.
Pipe Industrial Videoscope is a new NDT flaw detector,the detector combined with optical,electric technology,precision machinery and micro imaging technology.Pipe Industrial videoscope,with high definition, high reliability, high stability proved its excellent on-site detection ability.
We profession manufacturer pipe Industrial videoscope.
Pipe Industrial Videoscope,Industrial Videoscope Instrument,Handheld Industrial Videoscope,Probe Industrial Videoscope
Zhengzhou Runde Dellonscope Co.,Ltd. , https://www.china-borescope.com