Drinking equipment for silky chicken breeding

The ideal drinking water equipment should meet the following requirements: sufficient water, so that the chicken can easily obtain sufficient drinking water at any time and condition; to maintain the water quality clean, water drops, leaks, splashes, sprinkle less, is conducive to keep the environment dry; Easy to install and use, strong and durable. At present, the commonly used drinking fountains are sinks, nipples, cups, cranes, etc.
1. The sink water supply for sink type drinking fountains is widely used in China's chicken industry center. Its structure is simple and it can be directly used to supply water from taps. Generally, it uses long flowing water supply method. This type of trough drinking water equipment is simple, reliable water supply, and easy visual inspection, but the amount of water waste is large; at the same time, chickens easily pollute the water quality when drinking water, increase the chance of infection of the disease, unfavorable for disease prevention. Therefore, it should be regularly cleaned and disinfected.
2. The basic components of the drinking water dispenser are composed of a water storage box and a small water scoop that moves up and down with the shaft as a fixed point. Usually, the “spoon handle” rests on the surface of the water inside the water storage box and the chicken drinks water. Press the "scoop cup" and the water flows from the spoon into the "scoop cup". Each time the chicken is pressed, drink one serving of water and drink the water in portions. The water storage tanks communicate with each Other and the water surface is controlled by a water tank float valve at one end.
3, crane drinking fountains made of non-toxic plastic. The drinking tray has a diameter of 300-400 mm and a depth of 36-38 mm. Each waterer can breed 120 to 150 chickens and 90 to 100 species of black-bone chickens. This drinking fountain is mainly used for flat raising. The advantage is wide adaptability and does not hinder the flock. When used, the height of the drinking fountain must be suitable so that the edge of the tray is flush with the back of the chick or the eye of the chicken.
4, cup-type drinking fountains It is composed of bonnets, boring bars, trigger plates and cup bodies. When the water cup is connected to the water pipe, the bonnet is closed due to the water pressure. To make the water enter the water cup, lightly press the trigger plate with your finger, and touch the lever to push the bonnet away, and the water will enter the cup. Therefore, when the chicken drinks water, it can automatically fill the water by moving the touch panel, and maintain a constant water level in the cup. When using a cup drinker, the water must be kept clean and with proper water pressure. Therefore, a filter and a decompression device should be provided at the front end of the main pipe of the drinking fountain. If the water is mixed with debris, it is easy to make the mast stuck, causing the bonnet to close tightly; when the water pressure is too high, the bonnet is difficult to push open; the water pressure is too low, the bonnet is not easy to close, causing overflow. The appropriate water pressure should be: 0.01 kilopascals for newborn chicks, 17.5 kilopascals for 10-day old chicks, 24.5 kilos for 3-week old chicks, and 41.2-54.9 kipas for mature chicks. Cup drinkers have the advantage of small water consumption, cleanliness, not easy to leak, and not easy to spread diseases. The disadvantage is that cleaning is more troublesome.
5, nipple drinker named after the end of the papillary valve stem, used for cage care. The three-sealing technology has greatly reduced the leakage of such drinking fountains. The sealed water supply line ensures fresh and clean drinking water, eliminates external pollution, prevents the spread of diseases, and greatly reduces the incidence of diseases. More than 80% more water than troughs. Use nipple drinker to pay attention to water hardness and water pressure.
6, vacuum type drinking fountain consists of two parts: water tank and drinking tray. Open a sink on the drinking tray. When using, turn the water tank upside down to fill the water, and then pour the water tray over it. After fastening, flip and place the floor 180. Water flows out of the outlet until the hole is submerged. At this time, outside air cannot enter the water tank, creating a vacuum over the surface of the water tank, and the water will no longer flow out. When the chicks drink part of the water from the drinking water tray, the water level in the pan drops. When the water level is lower than the water outlet hole, the outside air re-enters the water tank from the water outlet hole to reduce the vacuum in the water tank and the water flows out automatically until Once again flood the hole. This will always maintain a certain water level in the drinking tray. The use of plastic drinking fountains should not be placed in places exposed to sunlight, so as to avoid plastic aging and discoloration. Vacuum drinking fountains are suitable for raising chicks.

Seed Cleaner & Grader becomes basic and popular grain seed cleaning equipment in recent years. It helps farmers effectively clean grain harvested from ground. Seed cleaner & grader is used to remove oversize impurity, undersize impurity, light impurity from grain seed. Besides this, it also can grade cleaned seeds to different size ranks. From sesame, wheat, paddy, to soybean, kidney bean, groundnut, Seed Cleaner Cum Grader has wide application.

 

We have different Grain Cleaning Machine models. Capacity ranges from 3 ton per hour to 20 ton per hour. Each model has its particular feature. We will suggest client suitable model for particular seeds. Grain seed cleaner driving power is 3 phase electricity. We can customize grain cleaner base on different electricity specification for clients worldwide.

Grain cleaner has reliable running, convenient screen replacing and maintenance.

 

 

Seed cleaning machine working procedure: Raw material is fed from the Bucket Elevator, then elevator transfer raw material to the wind sieve (air screen). In wind sieve, the straw, smashed pieces, dust and other light impurity is sucked out by air blower. After air cleaning, raw material is delivered to sieving trunk. Sieving trunk has several sieve layers. From top to bottom layer, the sieves holes are from big to small. There are vibration motors on both sides of the sieve trunk. While grain cleaning machine started, the sieving trunk begin vibration sifter. Seeds falling on first layer then go through several sieve layers. First layer sieve will remove the big impurity, final sieve layer sieve will remove the small impurity. Middle layers can be used to remove either big, small impurity or grading the cleaned seeds by size difference. Different layer material has different outlets. Finally clients get cleaned and graded grain seeds.

Model	Capacity (T/H)	Power (KW)	Weight (KG)	Feature
5XZC-3A	3	7.43	1300	Installed maize thresher
5XZC-3B	3	4.25	1200
5XZC-3C	3	7.25	1300	Installed wheat huller
5XZC-5A	5	12.74	1600	Installed maize thresher
5XZC-5CDH	5	11.74	1700	Installed wheat huller
5XZC-5DH	5	7.74	1600	With cyclone
5XZF-7.5F	7.5	10.1	1800	Double air cleaning systems, with destoner plate
5XZC-15	10	10.5	1800	With cyclone
5XZC-15A	10	20.93	2200	Installed maize thresher
5XZC-25	20	19.45	2900	Double cyclones
5XZD-15AC	20	20.9	3000	Double sieve trunks

Seed Cleaner & Grader

Seed Cleaner Cum Grader,Seed Cleaner Grader,Soybean Seed Cleaner,Air Screen Cleaner

SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , https://www.seedgraincleaner.com