The care and maintenance of Kailan electric constant temperature incubator are those
2. The electrothermal constant temperature incubator is not explosion-proof, so corrosive and flammable items are prohibited from being placed in the box.
3. When not in use for a long time, the power should be cut off. It is forbidden to enter the machine into the machine to avoid damage to the host.
4. Pay attention to the protection of the cabinet paint surface to affect the appearance of the box.
5. The power cord should not be wrapped around metal objects. Do not place it in a place with high temperature or humidity to prevent the rubber from aging and causing leakage.
6. Before use, please pay attention to whether the power supply voltage is consistent with the specified voltage, and the grounding pole of the power socket is effectively grounded as specified.
7. When the incubator is filled with valuable strains and cultures, it should be observed frequently, abnormal conditions occur, and the power supply should be cut off immediately to avoid unnecessary or unnecessary losses.
8. When using the power, do not touch the electrical parts of the space on the left side of the box with your hands or use a damp cloth and rinse with water.
9. When using the temperature is high, you should pay attention to burns.
10. The test object should not be over-squeezed in the box, so that the air flow is smooth, the heat inside the box is kept even, and the bottom plate of the inner chamber is close to the electric heater, so it is not suitable to place the test object. In the laboratory, the wind top flap should be properly opened to facilitate adjustment of the temperature inside the box.
11. Do not open the temperature controller to prevent damage if it is not necessary.
12. The power must be turned off after each use. Always keep the inside and outside of the box clean and the water in the tank clean.
13. The fuse tube is installed in the left space of the box. When changing, the side door needs to be opened and the power must be cut off.
The electrothermal constant temperature incubator adopts self-tuning PID technology, which has the characteristics of rapid temperature control and high precision. The set temperature and the actual temperature are both digitally displayed, easy to operate, and have a temperature upper limit tracking alarm function. The inside of the electrothermal incubator is made of stainless steel and has a multi-layer stainless steel shelf that can be moved and adjusted in height. After the outer door is opened, there is a tempered glass door for easy observation of the inside of the incubator. A micro fan is installed in the incubator to ensure uniform temperature in the incubator.
Polyvinyl alcohol is a kind of organic compounds, chemical formula for [C2H4O] n, the appearance is white flake solid flocculent or powder, odorless soluble in water (95 above), dimethyl sulfoxide, slightly soluble in benzene, toluene insoluble in gasoline kerosene, vegetable oil dichloroethane carbon tetrachloride acetone, ethyl acetate methanol glycol polyvinyl alcohol is an important chemical raw materials, such as used in the manufacture of polyvinyl acetal resistant to gasoline pipe and vinylon synthetic fabric treatment emulsifier paper coating adhesive glue, etc.
Polyvinyl Alcohol Pva,Low Binder Requirement Pva,Low Ash Content Pva,Smooth Burn-Out Profile Pva
Xingbang High Molecular Materials Co., Ltd. , https://www.chemicaladditive.com