Artificial ants

Site Selection Choose a room that is far from downtown, roads, sunny, air circulation, and easy to keep warm. At the same time, it requires cleanliness, no debris accumulation, no pesticide pollution, and no infestation by slugs, flies, cockroaches, rats, and snakes. The rooms must be equipped with screens and screen doors to prevent natural enemies from invading during ventilation.
The aquaculture equipment uses a giant box seal shed with a length, width and height of 4m3m2m for agricultural film in the house, and the size of the shed can be appropriately adjusted according to the size of the breeding volume. On the side of the seal shed facing the door, leave a roll-out entry door, made of plastic film. In the sealing shed, a wrap-around type sink with a depth of 10cm and a width of 20cm was used for brickwork. The joints were wiped with cement mortar and filled with water. A sidewalk was left outside the sink to observe the ant's activities. In the four corners of the open air surrounded by the sink, four columns of 1.7m in height are erected, and the columns are used to span. The distance between the layers is about 30cm. Each floor is flat and a layer of agricultural film is spread on the shelves. Sprinkle a thin layer of fine soil and place the ants on the shelf.
Breeding Management Place the bag containing the ant species on the shelf, open the mouth of the bag, and put food such as insects or biscuits outside the mouth of the bag. About 20 days after rearing, the trunk or bamboo section of the sycamore tree with a diameter of about 7 cm was cut into 20 cm sections. The core of the wood section was cut into a hollow with a diameter of 4 cm or more, and then discharged around the ant nest for ants to inhabit. These wood sections have moisturizing and not being attacked by natural enemies.
Black ants are omnivorous insects, bran, cornmeal, peanut cakes, fruit nucleus; silkworm pupa, earthworm worms, mealworms, cockroaches, spiders; meat slag and bones of pigs, cattle, sheep, chickens; fishmeal, biscuits, leftovers Rice, rice, etc. are all its food. However, all foods cannot come into contact with pesticides and toxic equipment. The ants' food intake is very small, and 100 thousand meals a day are about 100g. Feeding feeds should be less frequently fed, food consumed should be used, feed should be fresh, and feed types should be constantly changed. When feeding liquid foods such as honey, be sure to dilute, spread more and spread, and put less amount per point so as not to drown ants. The temperature of the rearing room is controlled between 15°C and 45°C (the ant rests below 8°C), the air humidity is maintained at 90%-95%, the soil moisture content is maintained at 10%-15%, and the soil is changed every 2 to 3 months. The new soil must be exposed to the sun, hot or fried and sifted.
The optimum temperature for propagation and reproduction of breeding ants is 25°C to 35°C. Under natural conditions, mating from April to September, if the temperature can be maintained above 25 °C, can be mated throughout the year. The eggs are laid 8 to 20 days after mating. The first batch of eggs is about 300 to 500 capsules. After 14 days of hatching, it became small worker ants after several peelings. Ants use a nest as a "family", generally ranging from 2000 to 7000 per litter, with a maximum of 10,000 or more. Under normal circumstances, as long as we have good temperature and humidity, we will raise them carefully and we can reproduce 200 litters per litter per year.
Wintering ants have strong cold resistance and will not freeze to death when the temperature is 0°C. The texture of the nest made by ants is strong and soft, and it has certain insulation effect. In winter, as long as the breeding room is properly insulated and prevented from invading by the enemy, the ants can safely pass winter. If the keeping temperature is about 25°C in winter, it can be reared in winter to increase the ant yield.
The harvesting of harvested ants for harvesting is mainly food inducement. When a ant colony is determined to be harvested, it is first allowed to be hungry for 3 to 5 days. At least 80% of the ants have hunger, and then use a piece of kraft paper or Plastic cloth, sprinkled with honey, melon, bones and other objects to attract ants, so that the ants climbed out of the full.
The process uses sun, water or mud manure to kill the ants (do not fry, cook or sprinkle pesticides), dry the dead ants, and store the ants separately from the ants. Bags can be sold separately. The finished product standard is no mildew, no pesticide contamination, complete limbs, moisture content does not exceed 8%.

Grips can be made of materials like stainless steel, plastic, aluminium, silicon, etc. Tattoo Grips are used in together with

tube stems to form the grip that you hold a Tattoo Machine with. Stainless Steel Tattoo Grips require an autoclave to

properly sterilize. A barrier method to keep the tattoo grip clean like a tattoo machine bag can be used, however, it

is still necessary to properly sterilize all grips & tubes and needles via an autoclave if the intention is to reuse these products.

Normal Disposable Tattoo Grip

Normal Disposable Tattoo Grip,Disposable Tattoo Grip,Disposible Tattoo Tubes,Hummingbird Disposable Tubes

Redtop Tattoo Supply Co., Limited , http://www.redtop-tattoo.com