Poultry Feed Adds High Oil Benefits

The addition of fats and oils in feed has become one of the important measures to improve animal performance. The melting point of 38 °C (or 40 °C) above is called tallow or fat, such as lard, suet, etc.; the melting point below 38 °C is called oil. Adding fats and oils to feeds can be easily used by pigs and pigs to save a lot of grain feeds. It can improve feed palatability and increase daily weight gain. In the summer, it can effectively reduce heat stress loss, and in the winter it can increase the ability to keep cold.
Sources of fats and oils Animal fats: The raw materials of animal fats are mostly from the by-products of meat processing plants. For example, the trimmed fat portion, the internal organs, and the inedible carcass part of the meat are also important sources of fats that are trimmed by the tanneries. The effect of the oil residue from food processing plants is also good, and the price of animal fats is decreasing. It can also be purchased.
Vegetable fats: Some vegetable oils and their oily feet can be fed. Commonly used vegetable oils are: peanut oil, soybean oil, sunflower oil, palm oil and so on. Cottonseed oil, rapeseed oil and linseed oil contain a certain amount of toxins. Apply after proper processing. The detoxified cottonseed oil still contains a small amount of gossypol and cannot be used for breeding pigs so as not to damage reproductive performance.
Add proportions and effects
1, piglets: pigs added 5% to 10% of the diet, can significantly increase the growth rate. Adding 5% to 6% fat to the weaned piglet diet can increase the weight gain of weaned piglets by 5% to 10%, and reduce feed consumption per kilogram of weight by 7% to 15%.
2. Growing fattening pigs: According to the experiment: Adding 1% grease to middle pigs (35-60 kg) can receive soot, reduce waste, and improve the absorption of fat-soluble vitamins. Finishing pigs weighing more than 45 kilograms, adding fat can not exceed 5%, otherwise easily lead to obesity. The addition of plant fat should not exceed 1.5%, otherwise it will cause the carcass to soften.
3, sows: pregnant sows feed should be added 2 to 3 weeks before labor, add the right amount of oil in the diet, do not have to worry about excessive milk caused by piglets diarrhea. But it can effectively promote fetal growth, increase birth weight, and can produce more uniform and more healthy and lively piglets.
Adding oils and fats during the lactation phase can significantly increase the milk fat percentage and the content of oleic acid in milk fat, which can increase the weaning weight by 6%. The most important aspect of high-energy diets is shortening the estrus time after weaning, which significantly improves the overall productivity of sows.
Pregnancy - The amount of oil added to a sow is generally 5% to 10% or 10% to 15% of the diet.
4, broilers: China's diet in the broiler chicken fat has been gradually paid attention. The amount of fat added is generally about 10% of the diet.
5. Laying hens: Adding 6% fat to the hen's diet, the egg production rate is increased to 76.20% compared to 70.69% in the control group; the feed ratio is reduced from 1:2.79 to 1:2.43, and the egg weight is from 60.5 gram. Increased to 61.5 grams, the average egg production per day increased from 42.57 grams to 46.90 grams.
6. Turkey: Adding fats and oils to the corn-based diet of turkeys increased the weight gain of 140-day-old males. The added amount generally accounts for about 8% of the diet.
The process of adding animal fats and oils is divided into four processes: heating, metering, pressurization and fuel injection.
1. Heating: Use a 3-kilowatt electric heater to insert the oil barrel for preheating so that the animal fat can change from a solid state to a liquid state. Each barrel takes about 1 hour, and the oil temperature reaches 50-70°C.
2. Manual measurement: Accurately require that the measured grease be poured into the metering tank with the piston's oil level meter and be used for multiple measurements once.
3, pressure: hot oil through 1.5BA - 6 type pump, the pressure of 1.7 kg square cm, pressed into the fuel tank.
4. Injection: Two fuel injection pipes are directly inserted into the mixer. The diameter of the injection hole is 1.5 mm, a total of 150, while fuel injection, the total injection area of ​​265 square mm. The ratio of the pump outlet area to the injection hole area is 3.84:1 in order to increase the injection intensity and the injection time is 30 seconds.
Precautions
1, control the number of additions, not as much as possible. General young birds are properly added, and pigs are not added at the late stage of fattening; modern varieties that are highly cultivated should be added more, and local varieties can be added less. Cereal feed-based diets are difficult to consume enough energy for high-yield pigs. Therefore, it is necessary to add oil. It is advisable to conduct a small batch of experiments at each pig farm and poultry farm, and determine the proportion of addition based on the test results.
2, to ensure the quality of grease. Must have no odor. Prevents doping, oxidation, denaturation, moldy, toxic and contaminated. Need to add an appropriate amount of antioxidants to prevent rancidity. Commonly used grease antioxidants are BHT (dibutylhydroxytoluene) or BHA (butylated hydroxyanisole), both of which are often used in combination, and are commonly used in concentrations of 0.005% to 0.02%. However, ethoxyquin cannot be used. Since ethoxyquin is measured in the active oxygen method, it evaporates before it undergoes oxidation.
3, pay attention to energy ratio. When adding fat, increase the supply of protein and amino acids to prevent the lack of protein and amino acids due to the addition of oils and fats.
4, after the addition of oil, in the feed must increase the supply of vitamin B12 and vitamin C, to facilitate the absorption and utilization of fat and improve feed utilization.
5, add oil must be gradual, from less to more, and gradually reach the design of the full amount.

In order to keep our body in good shape, more and more people would like to go to gym for training, most of them even spend more and more time in gym, even being active is daily or up to 3-4 time a week. Yeah, it`s a good thing to make our body keep active, but in the process of maintaining our active and over lifestyle, there is always the risk of injury. 

Bodybuidling Peptides are made from amino acids that are linked together. They can be thought of as a small protein sequence. They have many functions in the body including signaling and messaging. Some may act like neurotransmitters, while others may act like hormones. They bind to receptors on the cell surface and tell other cells and molecules what to do. Bodybuidling Peptides are very specific, which makes them safe, well tolerated and more importantly- allows them to control and influence how our bodies react to physical exercise and diet. Some people also use Raw Steroids, huam Growth Hormone, sarms, semi-finished oils and etc...

Peptides for Injury Repair
Active people can at some point find themselves in the grips of pain and frustration because of an injury. Life becomes a waiting game until they are back either on the playing field, at the gym, or on the dance floor.

For those of us no longer in our 20's, we must realize that the decline in growth hormone (GH), along with other hormones, has a lot to do with how well and how fast we recover from an injury. There are substances in the body that can increase the rate of injury repair - even connective tissue repair. This can be stimulated readily with growth hormone secretagogues and specific bodybuidling peptides. Secretagogues and bodybuidling peptides are substances that cause another substance to be secreted; in this case, growth hormone.

Human Growth Hormone is very good at communicating with tissue cells in the formation of new cells, growth factors, muscle fibers and joint rejuvenation. Secretagogues and bodybuidling peptides can work to stimulate GH release from the pituitary for this repair and regeneration mechanism to kick in quicker.

CJC-1295/Ipamorelin
CJC-1295/Ipamorelin combination has a strong effect on the release of Growth Hormone and IGF-1 and reduces body fat by forcing your body to burn its fat stores as a source of energy. This combo is also known to increase cellular repair, regeneration, and collagen production.

IGF-1
IGF-1 is the next generation in performance enhancement for muscle building. It is the most important growth factor that our bodies produce, even more so than HGH.


Repair Muscular Peptides

Repair Muscular Peptides,Peptides For Repair Muscular,Peptides Supplements Bodybuilding,Peptides For Recovery

beststeroidraws Co., Ltd , https://www.beststeroidraws.com