Lishui Fermentation Tips

When fermenting aquaculture feeds using a goldfish hydroponics starter, there are several important factors to consider in order to ensure the health and safety of the pigs: First, the salt content in the water can be quite high, which may lead to salt poisoning if fed directly to pigs. Especially for piglets and sows, it's recommended to wash them with boiling water to reduce the salt content before cooking and feeding. This helps prevent potential health issues caused by excessive sodium intake. Second, if the water contains detergents or other chemicals, it can damage the nutritional value of the feed, especially vitamins. To counter this, it’s advisable to add some vitamin supplements and green feed to the diet to maintain balanced nutrition. Third, the plastic barrels used for transporting the fermented feed must be clean and free from odors. The interior should be slightly acidic, which indicates that lactic acid bacteria are thriving—beneficial for the fermentation process and safe for pigs. If the barrels smell bad or are not acidic, it suggests harmful bacteria are present. In such cases, the barrels should be thoroughly cleaned and disinfected with hot water before reuse. Fourth, when using muddy or contaminated water for feeding, it’s crucial to take preventive measures against diseases. Vaccines such as those for swine fever, swine pneumonia, erysipelas, and diarrhea should be administered regularly to protect the herd from infectious diseases. Farmers should tailor their practices according to the specific conditions of their farms, making adjustments as needed. By properly managing the fermentation process and maintaining hygiene, they can maximize the benefits of using a goldfish hydroponics starter, leading to better growth rates and greater economic returns.

Mini Locking Plate

The mini locking system can be used for the fixation of ossicles and small bone fragments, osteotomy, arthrodesis, and replantation and reconstruction of ossicles and small bone fragments.

It is composed of micro locking plate 1.5mm/2.0mm/2.4mm/2.7mm series, covering a variety of plate types and a wide range of indications. The plates are all anatomical design, which reduces the need for shaping and helps to reduce the workload of surgeons. Low profile and countersunk screw design can reduce soft tissue injury. Matching orthopedic screws self-tapping design, convenient implantation, screw plum design, reduce screw hexagonal sliding teeth. The composite hole design can not only realize the compression of the fracture end, but also can be used as a locking internal orthopedic fixation frame. Part of the reconstruction structure is convenient for the surgeon to tailor the implant according to the actual situation in the reoperation, and increase the flexibility of the operation. Its indications are mainly phalanx, metacarpal, scaphoid and other carpal bones, ulnar styloid process and capitulum, radial head and styloid process fracture fixation. The 1.5mm orthopedic implants titanium system is mainly used for the middle and proximal phalanx, the 2.0mm orthopedic plates system for the metacarpal bones, the 2.4mm implant locking plate system for the first metacarpal bones and carpal bones, and the 2.7mm mini plate system is mainly used for the distal ulna and radius. According to the clinical research, the micro-locking plate internal fixation in the treatment of multiple comminuted metacarpal fractures can effectively achieve the anatomical reduction and healing required by the clinic. The patients have good postoperative healing, and the functional recovery of the affected limb is good during the postoperative follow-up. It has good clinical effect and can be further promoted and applied.

lcp plate,Locking Plates,orthopedic implant,plate locking

Jiangsu Aomed Ortho Medical Technology Co.,Ltd , https://www.aomedortho.com