How to prevent agricultural motor damage
The technical condition of the starting equipment of the electric motor is directly related to whether it can be started smoothly. Practice shows that most of the motors that are burned are started and burned. If the start-up equipment has a poor state of technology, the lack of phase starts; the contacts of the contactor pull the arc, causing the voltage and current to change dramatically.
The best way to keep the equipment in a good technical condition is to do inspections, cleaning and fastening work. If the contacts of the contactor are not clean and the oxidative ablation is serious, the contact resistance will increase, causing heat and ablation of the contacts, thus forming a phase-missing operation and burning the motor windings; the contactor suction coil core has rust and dust , It will make a strong noise absorption and increase the coil current until the coil is burned.
Therefore, the electrical control cabinet should be set in a dry, ventilated and easy to operate position; also regular dust removal, cleaning contacts; coil core to increase rust prevention measures; often tighten the connection parts; check contactor contacts, ensure Good contact, institutional actions should be flexible and accurate, these are the inevitable conditions to ensure smooth start-up.
Second, keep the motor clean and a good cooling environment
At the air intake of the motor, it must always be kept clean. There must be no dust, oil, water stains or other debris in the surrounding of the air inlet to prevent such things from inhaling into the motor to form a short circuit medium or damage the motor winding insulation layer; or to block the ventilation cooling of the motor and increase the temperature, resulting in burn.
Third, keep the motor working at rated current
The main reason for the overload operation of agricultural motor is that the dragging load is too large; the voltage is too low; or the mechanical drag caused by dragging is caused. When the motor is in an overload state, the motor speed drops, the current increases, the temperature rises, and the winding coils overheat. If the overload time is slightly longer, the overload motor absorbs a large amount of active power from the power grid, and the current increases rapidly, and the temperature rises accordingly. Motor insulation materials that operate at high temperatures tend to age and fail to burn the winding coils. This is the main reason for burning a motor.
Hyaluronic Acid For Skin, Sodium Hyaluronate is well known as the best [Natural Moisturizing Factor". For Hyaluronic Acid Cream . In the early 1980s, the excellent moisturizing function of Sodium Hyaluronate has been widely concerned by international cosmetics industry. With its unique film-forming and hydrating characteristics, Hyaluronic Acid Powder Cosmetic Grade is used as a highly effective humectants in cosmetics. It attracts moisture to the skin and hold moisture in the skin, which preserve skin smoothness, suppleness and elasticity. 1 gram of Hyaluronic Acid Powder Cosmetic Grade is able to retain up to 1000 gram of water. So it is regarded as the [key to the fountain of youth".
The effects are as follows:
(1) Moisturizing effect
Moisturizing is the most important effect of Sodium Hyaluronate in cosmetics products. It can be hydrated shell
in skin surface and make the corneum hydration and softening. Compared with
other humectants, Sodium Hyaluronate is less effected by the environment as it
has the highest hygroscopic capacity in a relatively low humidity (e.g., in a
dry winter), but has the lowest hygroscopic capacity in a relatively high
humidity (e.g., in a damp summer). This unique property of Sodium Hyaluronate
makes the skin adapt to different seasons.
(2) Skin nutrition effect
Sodium Hyaluronate is the inherent biological materials of skin. The exogenous
Sodium Hyaluronate can complement the endogenous Sodium Hyaluronate. Low molecular Sodium Hyaluronate can
penetrate into dermis directly to improve the nutrient supply.
(3) Skin repair effect
There is some evidence that topically applied Sodium Hyaluronate can reduce
skin irritation
from various causes. During clinical trials it was also shown that this
ingredient is effective in promoting healing and fighting inflammatory
conditions of the skin. Sodium Hyaluronate serves as a free radical scavenger
and antioxidant, helping to protect the skin from the aging effects of
excessive sunlight exposure.
(4) Emollient and Film-forming
Sodium Hyaluronate is high polymer with high lubrication and film-forming.
Sodium Hyaluronate contained in cosmetics creates protective film on the
surface of skin, which retains moisture, and at the same time prevents moisture
in the skin from evaporation, so that improves freshness of the skin.
(5) Thickening
Sodium Hyaluronate solution have
high viscosity, and 1% solution is gelatinous. It can be added to cosmetics to
improve the thickening and stability.
Specification
|
Test Items |
Standard |
|
Appearance |
White powder |
|
Hyaluronic Acid |
≥95% |
|
Molecular weight |
800Kda-2000Kda |
|
PH |
6.5-8.0 |
|
Solution transmittance |
≥99.0% |
|
Loss on drying |
<10% |
|
Protein |
≤0.05% |
|
Dynamie viscosity |
Measuned value |
|
Heavy metal |
<20ppm |
|
Bacterial counts |
<100cfu/g |
|
Mold and Yeast |
<10cfu/g |
|
Staphylococcus aureus |
Can not be checkout |
|
Chlorop seu domonas |
Can not be checkout |
|
Shelf Life |
Two Years |
|
Conclusion |
The results meet the USP standard |
Cosmetic Grade Hyaluronic Acid Powder
Hyaluronic Acid For Skin,Hyaluronic Acid Cream,Pure Cosmetic Grade Hyaluronic Acid,Hyaluronic Acid Powder Cosmetic Grade
Qufu Hi-Tech Trading Co., Ltd. , https://www.chinahyaluronic-acid.com