Deep winter diesel engine attention

First, after the diesel engine works, due to the external environment temperature is too low, put the cooling water should be carried out after the stoppage of the water temperature after 15 minutes, not immediately, otherwise it will be because the airframe and the external environment temperature difference is too large, As a result, some parts of the diesel engine are deformed, which in turn affects the performance of the diesel engine (such as the deformation of the cylinder head).

Second, when the water can not be turned on after the water switch is all right, we should also pay attention to observe the specific status of the water to see if the water flow is smooth, whether there is a small water flow or when the phenomenon of fast and slow. If these conditions occur, it means that the cooling water contains impurities that hinder the normal flow of water. In this case, it is best to remove the water release switch and allow the cooling water to flow out directly from the body. If the water flow is still not smooth, then use a hard and slender steel item such as iron wire to dredge until the water flow.

Dental Lab Machine

* 1.Heavy-duty vacuum motor provides precise downward suction
* 2.Features a symmetrical heating system, ensuring uniform heat distribution
* 3.Adjustable, rust-resistant body accommodates various materials
* 4.Suitable for a wide range of clinical applications
* 5.Non-rotating sliding frame makes operation easy and stress-free
* 6.Compatible with all dental thermoplastics

* 7.Temporary, permanent base, dental care of the molding and production;

Dental Polishing Lathe Machine,Dental Centrifugal Casting Machine,Dental Lab Milling Machine,Dental Lab Milling Center

Suzhou Escomedical Equipment Co.,Ltd , https://www.escodental.com